25 YEARS
BEST IN SERVICE
Multifile Locker Power-System
Charge laptops, notebooks, iPads, tablets, mobile phones, rechargeable tools or any portable device. Designed and Manufactured in Australia.
Introducing Multifile’s Locker Power System, this innovative solution can be fitted to our range of Australian made lockers to charge laptops, notebooks, mobile phones and other portable devices including power tools… actually any rechargeable gadget.
Lockers supplied with this system are available as single or multiple units connected together utilising only one power lead (limitations apply).
How it works
The Mainline™ powered track that runs the full length of each locker contains three copper strips (busbars) which carry the live, earth and neutral cables of the power supply and houses them in a safe, discreet manner so that they are only accessible through specially designed sockets. The powered track accommodates 240 volt GPO sockets, dual USB sockets and the soon to be released USB-C socket.
Simply insert one of our power sockets into the track and twist 90° clockwise to make a connection. Each socket can easily be inserted anywhere along the track. To release, just push a button and turn anticlockwise. To secure the socket on a permanent basis insert a specially supplied screw in the side to prevent unlocking.
Safety
The unique design of the powered track means the position of the live strip restricts contact from foreign objects or prying fingers.
The Mainline™ powered track complies with Australian safety standards.
Further protection is provided by a Clipsal 952 Series Safety Switch tted to the power lead.
| Mainline System | |
| Single Phase wall/surface mounted power track | |
| Rated Voltage | Up to 250Vac |
| Rated continuous current: | Up to 32 Amps ac |
| Environment for use: | Indoor areas |
| Degree of protection: | IP2Xd |
| Dielectric strength: | 3kVac for 1 minute |
| Flammability: | Self-extinguishing UL 94-5VA |
| Track material: | High impact rigid PVC |
| Adaptor contacts engaged within a system of stamped copper busbars fitted into a theromplastic track | |
| Adaptors can be connected and disconnected when system is energised. | |
| Product conforms to National Standards | |
| Single phase power track | MLP1-10A Socket |
| IE61524-1, AZ/NZS61534-1 | AS/NS 3112 |
| IEC61534, A/NZS61534-21 | |
| CLIPSAL SAFETY SWITCH-952 | |
| Amperage | Amperage |
| Voltage | IEC61534, A/NZS61534-21 |
| Tripping Current | 30mA |
| Total Load | 2400W |
| Flex suitability 0.75 to 1.5mm2 ordinary duty | |
|
AS/NZS 3100 and As/NZS 3112 AS/NS 3190, Class L |
|
